|

|

|
|
IP
Paging
over Ethernet
... Modular, Easy
Digital Acoustics announces IP7
Series, next-generation
voice quality audio over wired, wireless and
fiber in LAN/WAN networks
|
IP7
Series IP Public Address and Paging
... 100%
Network/ IP based

 Central
software manages system with digital voice quality
Zones
extend over networks, span the Internet
Supports
1000's of stations without
head-end hardware
Highly
configurable zone template mapping
Powerful
integrated amplifier provides loud, crisp
quality
Interface
to analog overhead loudspeakers
Fast
to deploy, easy to maintain
Audio
monitoring and intercom capability at any end-point
Multicast
Protocol enables seamless, clear, low
bandwidth audio distribution
Connect
VoIP Telephony Systems using TalkMaster™ SIP
Media Gateway (SIP 2.0)
Patent
pending Digital Acoustics® technology
|
|
|
t
Digital
Acoustics offers an wide choice of speakers for the
most demanding IP speaker paging requirements. Every
acoustic environment is unique and using the right
speakers is important in providing intelligible public
address solutions. Digital Acoustics' IP speaker
paging systems include:
- 8" Ceiling
Mounts - Round and Square IP Paging Speakers
- Dual speaker
hallway coverage version -
- Surface Mounted
Enclosures - Square and Sloped
- Internal Horns
- External Paging
Horns
- Corrections Grade
Solutions (Vandal Proof)
- Weather Proof
& Flame-retardant
For
applications that incorporate 25/70v or 8 ohm speaker
systems modular
IP7- SS8/SS20 Audio Amplifiers are a perfect
solution. The IP7 series can drive
8-Ohm speakers, or multiple
speakers in an array. . With a
maximum output of 20 watts the SS20 (8 Ohms) is capable of driving paging horns with sound pressure
levels in excess of 120 db SPL. For low output
applications (<8 watts) the SS8 and SE8 can use Power
of Ethernet (POE).
For
specific applications that require unique coverage
inside a building solutions
Digital Acoustics offers the SPKR-11-VC-P Bi-directional
Speaker. The design incorporates a completely self
contained IP Amplifier and dual speaker paging system.
The surface mounted enclosure projects sound
side-to-side for maximum efficiency and coverage
length. It only requires an Ethernet connection with
PoE, no other wiring is required. It is intended for
indoor wall or ceiling mount for corridor paging of
voice, tones and music.
Bi-Directional
Speaker 11-BD
-
One Bi-directional speaker
can replace up to 10 ceiling mount speakers
-
Reduces installation labor
up to 80%
-
Ideal for hallways with
hard surface ceilings to limit buried conduit runs
-
High intelligibility dual 4
inch speaker system
-
Built in IP Amplifier
simplifies wiring to just 1 Poe Ethernet
connection per device
Audio
Distribution Systems ... the IP Paging advantage
PA/IP (PA over IP),
VoIP and SIP enabled paging provides
unique advantages over analog paging systems
- Proven cost saving over new single function wiring in deployment into existing
buildings.
- Spans multiple facilities inter-city, regionally and globally, without
head-end hardware.
- Scalable network topology facilitates expansion possibilities
- Incorporates system wide capability to add
intercom, 2 way-audio monitoring (reentrant
capability) and remote monitoring functions.
- Perfect for Retailers, Government and School systems with complex
inter-building distribution need. Multicast
Protocol enables seamless, clear, low
bandwidth audio distribution
- Easily integrate into emergency systems.
- Provides Ethernet network based redundancy for emergency broadcasts, and employee
evacuation systems.
- Design to
integrate to SIP and VoIP enabled systems via
TalkMaster(tm) software.
Emergency Preparedness
/ IP, VoIP and SIP Paging Systems
- Provides supplemental reach to overhead
IP paging, parking, inter-building and
even individual desktop notification.
- Network based system provides integration path to meet needs and requirements
for notifications to individuals with disabilities.
- Cost effective means for compliance to Federal Emergency Decision and
Notification Protocol OPM/GSA/NIH and other interagency requirements.
- Call us to discuss
NFPA
NFPA 71-2012 and our Ethernet VoIP Paging solutions

-
Protocols
TCP/IP, UDP, IP, ARP, ICMP, IGMP, MULTICAST
-
Packets
IP, VOIP
(Voice over Internet Protocol), SIP (Session
Initiated Protocol)
- Addressing Static or DHCP dynamically assigned IP over
Ethernet
- Audio Voice-band VoIP PCM,
G.711, selectable bandwidths
- Power 8 Watt SE8/SS8, 20 Watt
amplifier SS20, options for 25/70v transformers
- SE8 options Door relays,
Sensors, Integrated 2 port network switches
- LAN 10/100 Base-T,
Ethernet RJ45 for CAT5/CAT6. Supports wireless & fiber.
|